The Element RC Enduro Ecto Black Trail Truck 4×4 Ready to Run 1/10 Rock Crawler. This Scratch ‘N Weather bodyshell comes out of the box with a durable black exterior paint job. This allows the paint to be scratched and weathered as you drive and scrape against rocks and branches. This means your polycarbonate bodyshell looks more scale the more you drive it. Aimed towards the serious RC rock crawler enthusiast, the Enduro Ecto Trail Truck is packed full of performance features that are sure to impress.
Built on Element RC’s proven stamped steel C-channel chassis this truck features the Gatekeeper Suspension package (GKS) with rear trailing arms that move the shocks forward. This allows for a larger shock tuning window and improves weight bias. The trailing arms are paired with a rear anti-roll bar for a more stable and consistent suspension when crawling on the rocks. An adjustable aluminum track bar mount firmly bolted to the chassis rail gives the Enduro Ecto more reliable and responsive steering without the flex. Shock mount inserts offer multiple mounting positions to allow for precise suspension tuning, whether moving the shocks up, down, forward, or back.
Behind-the-axle (BTA) steering link significantly improves approach angle and front-end clearance, making rough terrain easier to handle. The Stealth X features the ability to adjust the rear drive ratio independently of the front drive across three levels: stock overdrives the front end 5.7% (installed in the Ready to Run), option 1 provides a one-to-one drive ratio front-to-rear (available separately), and option 2 overdrives the front end 11.83% (included with Ready to Run).
NOTE: The body included with this truck comes free of scratches and weathering. The photos shown are an illustration of the weathering effect.
Features:
- Stealth X Transmission
- Aluminum Track Bar Mount
- Shock Mount Inserts
- Rear Anti-Roll Bar
- Reedy Power 5-slot 14-turn brushed 550 crawler motor
- Water Resistant Reedy Power ESC
- Trailing Arm Rear Suspension
- Behind-the-axle (BTA) steering
- Aluminum steering plates
- Integrated servo winch mount
- Threaded aluminum shock bodies
- CMS (Chassis Mounted Servo)
- Universal front drive axles
- Stamped steel frame rails
- Aluminum motor plate
- Optimized ball cups for more fluid axle articulation
- Telescopic driveshafts front and rear
- Extruded aluminum driveshaft splines
- One-piece rear axle design
- Splined front axle with adjustable caster
- Machined input pinion gear
- Metal ring gear
- Machined steel top shaft
- Heavy duty 5mm diameter steel links
- Metal ball bearings included
- 12mm Hex
- Adjustable front track bar
- Licensed 1.9″x4.65″ General Grabber X3 tires
Specifications:
- Scale: 1/10
- Power Source: Electric
- Length: 462mm (18.19in)
- Width: 236 (9.29in)
- Wheelbase: 325mm (12.8in)
